Skip to main content
Version: 2.7.3

Client authentication using tokens based on JSON Web Tokens

Token authentication overview#

Pulsar supports authenticating clients using security tokens that are based on JSON Web Tokens (RFC-7519).

You can use tokens to identify a Pulsar client and associate with some "principal" (or "role") that is permitted to do some actions (eg: publish to a topic or consume from a topic).

A user typically gets a token string from the administrator (or some automated service).

The compact representation of a signed JWT is a string that looks like as the following:

eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJKb2UifQ.ipevRNuRP6HflG8cFKnmUPtypruRC4fb1DWtoLL62SY

Application specifies the token when you create the client instance. An alternative is to pass a "token supplier" (a function that returns the token when the client library needs one).

Always use TLS transport encryption#

Sending a token is equivalent to sending a password over the wire. You had better use TLS encryption all the time when you connect to the Pulsar service. See Transport Encryption using TLS for more details.

CLI Tools#

Command-line tools like pulsar-admin, pulsar-perf, and pulsar-client use the conf/client.conf config file in a Pulsar installation.

You need to add the following parameters to that file to use the token authentication with CLI tools of Pulsar:


webServiceUrl=http://broker.example.com:8080/brokerServiceUrl=pulsar://broker.example.com:6650/authPlugin=org.apache.pulsar.client.impl.auth.AuthenticationTokenauthParams=token:eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJKb2UifQ.ipevRNuRP6HflG8cFKnmUPtypruRC4fb1DWtoLL62SY

The token string can also be read from a file, for example:

authParams=file:///path/to/token/file

Pulsar client#

You can use tokens to authenticate the following Pulsar clients.


PulsarClient client = PulsarClient.builder()    .serviceUrl("pulsar://broker.example.com:6650/")    .authentication(        AuthenticationFactory.token("eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJKb2UifQ.ipevRNuRP6HflG8cFKnmUPtypruRC4fb1DWtoLL62SY")）    .build();

Similarly, you can also pass a Supplier:


PulsarClient client = PulsarClient.builder()    .serviceUrl("pulsar://broker.example.com:6650/")    .authentication(        AuthenticationFactory.token(() -> {            // Read token from custom source            return readToken();        }))    .build();

Enable token authentication#

On how to enable token authentication on a Pulsar cluster, you can refer to the guide below.

JWT supports two different kinds of keys in order to generate and validate the tokens:

  • Symmetric :
    • You can use a single Secret key to generate and validate tokens.
  • Asymmetric: A pair of keys consists of the Private key and the Public key.
    • You can use Private key to generate tokens.
    • You can use Public key to validate tokens.

Create a secret key#

When you use a secret key, the administrator creates the key and uses the key to generate the client tokens. You can also configure this key to brokers in order to validate the clients.

Output file is generated in the root of your Pulsar installation directory. You can also provide absolute path for the output file using the command below.


$ bin/pulsar tokens create-secret-key --output my-secret.key

Enter this command to generate base64 encoded private key.


$ bin/pulsar tokens create-secret-key --output  /opt/my-secret.key --base64

Create a key pair#

With Public and Private keys, you need to create a pair of keys. Pulsar supports all algorithms that the Java JWT library (shown here) supports.

Output file is generated in the root of your Pulsar installation directory. You can also provide absolute path for the output file using the command below.


$ bin/pulsar tokens create-key-pair --output-private-key my-private.key --output-public-key my-public.key
  • Store my-private.key in a safe location and only administrator can use my-private.key to generate new tokens.
  • my-public.key is distributed to all Pulsar brokers. You can publicly share this file without any security concern.

Generate tokens#

A token is the credential associated with a user. The association is done through the "principal" or "role". In the case of JWT tokens, this field is typically referred as subject, though they are exactly the same concept.

Then, you need to use this command to require the generated token to have a subject field set.


$ bin/pulsar tokens create --secret-key file:///path/to/my-secret.key \            --subject test-user

This command prints the token string on stdout.

Similarly, you can create a token by passing the "private" key using the command below:


$ bin/pulsar tokens create --private-key file:///path/to/my-private.key \            --subject test-user

Finally, you can enter the following command to create a token with a pre-defined TTL. And then the token is automatically invalidated.


$ bin/pulsar tokens create --secret-key file:///path/to/my-secret.key \            --subject test-user \            --expiry-time 1y

Authorization#

The token itself does not have any permission associated. The authorization engine determines whether the token should have permissions or not. Once you have created the token, you can grant permission for this token to do certain actions. The following is an example.


$ bin/pulsar-admin namespaces grant-permission my-tenant/my-namespace \            --role test-user \            --actions produce,consume

Enable token authentication on Brokers#

To configure brokers to authenticate clients, add the following parameters to broker.conf:


# Configuration to enable authentication and authorizationauthenticationEnabled=trueauthorizationEnabled=trueauthenticationProviders=org.apache.pulsar.broker.authentication.AuthenticationProviderToken
# Authentication settings of the broker itself. Used when the broker connects to other brokers, either in same or other clustersbrokerClientTlsEnabled=truebrokerClientAuthenticationPlugin=org.apache.pulsar.client.impl.auth.AuthenticationTokenbrokerClientAuthenticationParameters={"token":"eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.9OHgE9ZUDeBTZs7nSMEFIuGNEX18FLR3qvy8mqxSxXw"}# Or, alternatively, read token from file# brokerClientAuthenticationParameters={"file":"///path/to/proxy-token.txt"}brokerClientTrustCertsFilePath=/path/my-ca/certs/ca.cert.pem
# If this flag is set then the broker authenticates the original Auth data# else it just accepts the originalPrincipal and authorizes it (if required).authenticateOriginalAuthData=true
# If using secret keytokenSecretKey=file:///path/to/secret.key# The key can also be passed inline:# tokenSecretKey=data:;base64,FLFyW0oLJ2Fi22KKCm21J18mbAdztfSHN/lAT5ucEKU=
# If using public/private# tokenPublicKey=file:///path/to/public.key

Enable token authentication on Proxies#

To configure proxies to authenticate clients, add the following parameters to proxy.conf:

The proxy uses its own token when connecting to brokers. You need to configure the role token for this key pair in the proxyRoles of the brokers. For more details, see the authorization guide.


# For clients connecting to the proxyauthenticationEnabled=trueauthorizationEnabled=trueauthenticationProviders=org.apache.pulsar.broker.authentication.AuthenticationProviderTokentokenSecretKey=file:///path/to/secret.key
# For the proxy to connect to brokersbrokerClientAuthenticationPlugin=org.apache.pulsar.client.impl.auth.AuthenticationTokenbrokerClientAuthenticationParameters={"token":"eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJ0ZXN0LXVzZXIifQ.9OHgE9ZUDeBTZs7nSMEFIuGNEX18FLR3qvy8mqxSxXw"}# Or, alternatively, read token from file# brokerClientAuthenticationParameters={"file":"///path/to/proxy-token.txt"}
# Whether client authorization credentials are forwarded to the broker for re-authorization.# Authentication must be enabled via authenticationEnabled=true for this to take effect.forwardAuthorizationCredentials=true